With our new Micro Magic Polishing System, you can achieve a perfect finish in three easy steps. Let’s Get Started!
Sand your blank through 400 grit or higher. Be careful when sanding, as too much friction can cause heat buildup that can damage or even ruin the blank. Use a clean paper towel to remove all of the sanding dust.
Micro Magic is a 3 step polishing system with color-coded jars for reference. Just remember Red (1), White (2), Blue (3). Because of Micro Magic’s unique formula, a small amount goes a very long way.
- Using a paper towel, apply a small amount of Micro Magic Step 1 (red jar) and polish the blank. Once the blank is polished, use a clean paper towel to buff the blank.
- Repeat the process using Micro Magic Step 2 (white jar) to polish the blank. Using a clean paper towel, buff the blank.
- Apply a small amount of Micro Magic Step 3 (blue jar), with a paper towel and polish the blank to a final finish and you’re done. It’s that easy!
Micro Magic includes a UV inhibitor so you can use it as a final finish on your stabilized pens and projects to protect against oxidation. Micro Magic also produces similar results on CA finishes too!